Product
Nexensor is oriented to the future with a perfect measuring technology.
It is possible to install high-output LDs for industrial laser applications.
It is easy to detach and attach LDs because no soldering is needed during attachment of LDs.
| Specification | ||
|---|---|---|
| Optical specification | Fiber Terminal | SMA905 |
| Operation mode | CW | |
| Output power instability (25°C) | <1% | |
| Operating Temperature range | 0~75 °C | |
| Spectral Width (FWHM) | 7 nm | |
| Output Power | 300 W | |
| Electrical Characteristics | Max Out Current | 20 A |
| Max Out Voltage | 30 V | |
| Input Voltage | AC 220 V / 60 Hz | |
| Interface | RS232 | |
| Others | Weight | 10 kg |
| Dimension(mm) | 315(W) X 365(D) X 165(H) | |
The LD driver modules were manufactured for easy detachment
and attachment of LDs by the R&D center and the university. These are composed in multi-channels
for easy expansion so that many LD drivers can be connected and used.
| Specification | |
|---|---|
| Connector type | 14-pin Butterfly Pkg.(Socket type) |
| LD Max Operating Current | 2 A |
| TEC Max Operating Current | ±2 A |
| Operating Temperature | 10~40°C |
| Temperature Stability | <0.1°C |
| Input Volt | DC 5 V |
| Interface | RS422 / 16 Ch. Expansion / 1 Ch. AD |
| Dimension(mm) | 42(W) X 103(D) X 28(H) |
Nexensor
| 70, Yuseong-daero 1689beon-gil, Yuseong-gu, Daejeon, Republic of Korea
| TEL. 042-710-7760
| EMAIL. sales@nexensor.com
Copyright ⓒ 2019 NEXENSOR All rights reserved.